D-Link ENW-3503, User Manual

Page: 41 / 64

Appendix A
PLANET ENW-3503 User's Manual 6-1
6. APPENDIX A: NDIS2 AND ODI
DRIVERS FOR WFW 3.11
NDIS2 Driver for Workgroups
1.Run Windows for Workgroups and click Network Setup
icon in Network group.
2.In Network Settings dialog box, click Networks... button
to select the network operating system.
3.In Networks dialog box, check the radio button before
Install Microsoft Windows Network and No Additional
Network . Press OK to go back the Network Settings
screen.
4.Click Drivers... button to select network driver.
5.In Network Drivers dialog box, press Add Adapter...
button to enter Add Network Adapter dialog box. Select
Unlisted or Updated Network Adapter then press OK .
6.Windows will prompt a Install Driver dialog box. In this
time, put the driver diskette into floppy drive then press
OK .
7.Select the Real mode NDIS2 for... string then press OK .
8.Follow Windows instructions to complete the installation
and exit Windows.
9.Run INSTALL.EXE from root directory of driver diskette.
10.Select Windows for Workgroup in Network Operating
System screen.
11.If current settings are acceptable, select Start Installation
and go to step 13. Otherwise, select Modify Parameters
to make settings changed.
12.Move cursor to the setting you want to make a change for
then press Enter to select a fit value. When the
configuration is set completely, press Enter on the OK
field to exit the screen then go back to step 11.