D-Link ENW-3503, User Manual

Page: 19 / 64

2 INSTALLATION
PLANET ENW-3503 User's Manual 2-9
10. Click CONTINUE button
11. Insert the driver disk into floppy disk drive, then
enter the correct path (A:\).
12.
Take a choice for the Et Fax/Modem PC
Card then press OK .
13. A dialog box will be poped up for the driver
settings change.
14. Give appropriate system resources to the
ENW-3503 PC Card, the settings
must be unique for this device.
Resources Recommendation
I/O Base I/O:300. Possible alternative:
320, 340, 360
Interrupt
(IRQ) IRQ:5. If your laptop is equipped
with multimedia devices, a
higher interrupt (IRQ:11) may
be needed.
Base Memory D000. Possible alternative: D800
COM Port COM2 to COM4. Select one of
the COM port that is not in use
by other communication devices.
15. When all settings are completed, press OK
Windows NT will load network and grant
configurations for
-NWLink
-TCP/IP
-Netbeui
Typically the configurations are unique for
each network. Ask your network administrator
for help if you want to change them.
16. Once all network softwares are well loaded, press
OK . The configuration and bindings for the PC