DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
490
Parameters
CNPV-PRIORITY-VALUE
Specifies the IEEE 802.1p priority value to be the Congestion Notification Priority
Value (CNPV). The valid priority range of CNPV is 0 to 7.
admin-defense-mode
{disable | interior |
interior-ready | edge}
(Optional) Specifies the CND defense mode for this CNPV on the interface.
disable:
The congestion notification capability is administratively disabled for this
priority.
interior:
The priority parameter of frames input are not remapped to or from this
priority, and the frames are transmitted without CN-TAG ;
interior-ready:
The priority parameter of frames input are not remapped to or
from this priority, and CN-TAGs won’t be stripped off when transmitting the
frames;
edge:
The priority parameter of frames input at this priority are remapped to an
alternate value, frames at other priorities are not remapped to this priority, and
the frames are transmitted without CN-TAG .
If not specified, the default defense mode is
disable
alternate-priority
PRIORITY-VALUE
Specifies a priority value to which this priority value is to be remapped when the
receiving frame with a dot1p priority equal to the specified CNPV at Edge port. The
valid priority range is 0 to 7. If not specified, the default alternate priority is 0.
defense-mode-choice
{admin | auto | comp}
Specifies how the default CND defense mode and alternate priority for this
Congestion Notification Priority Value on this interface.
admin:
The default CND defense mode and alternate priority are specified by
administrator.
auto:
The default CND defense mode and alternate priority are controlled
automatically.
comp:
The default CND defense mode and alternate priority are determined by
global setting.
If not specified, the default defense mode choice is
comp
.
Default
None.
Command Mode
Interface Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
The command is available for physical port configuration. You need use the
qcn
cnpv
command in the global configuration mode to assign the priority value as a
CNPV at first. When you issue the command in the interface mode and specify a
priority which has not been globally assigned as a CNPV an error message will be
prompted. The interface CNPV configuration has higher precedence than global
CNPV configuration. That means the modification of the interface CNPV
configuration overrides the global CNPV configuration.
If the
qcn cnpv
CNPV-PRIORITY-VALUE
command is issued without any optional
keywords, all the setting of the specified CNPV for the interface will be retained.
If you want administratively deactivate the CNPV on the specified interface, you
need to:
• Use the optional keyword
defense-mode-choice
to set the defense mode
choice to admin.
• Use the optional keyword
admin-defense-mode
with the argument
disable
.
The command only takes effect when the QCN is enabled globally.
Example
This example shows how to administratively assign the defense mode to interior for
CNPV 2 at interface
Gi1.1
.
DXS-3600-32S#configure terminal
DXS-3600-32S(config)# interface gigabitEthernet 1/1/1
DXS-3600-32S(config-if)# qcn cnpv 2 defense-mode-choice admin
DXS-3600-32S(config-if)# qcn cnpv 2 admin-defense-mode interior
DXS-3600-32S(config-if)#
Summary of Contents for DXS-3600-16S
