D-Link DXS-3600-16S, Manual

Page: 425 / 695

DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
417
Password Recovery Commands
The first two commands, listed in this chapter, are only available when the user enters the Password Recovery mode.
For more information about how to access the Password Recovery mode, see
“Appendix A - Password Recovery
Procedure” on page 664 .
41-1 clear
This command is used to clear the password, username or password on the current device.
clear {levelpassword | username | configure}
Parameters
41-2 reload
This command is used to reboot the switch.
reload
levelpassword Specifies to clear the password for each level.
username Specifies to clear all the usernames and passwords on the device and set the line
authentication to
no login local , no login , and no login authentication at the same
time.
configure Specifies to clear all the configurations on the DUT.
Default None.
Command Mode EXEC Mode in Password Recovery Mode.
Command Default Level Level: 1
Usage Guideline When the password is lost, or the username information is lost, the user can enter
the password recovery mode and use this command to clear the level, clear the
username or clear the configuration.
Example This example shows how to clear the configuration to factory default settings.
>clear configure
>
Example This example shows how to clear the level password to factory default settings.
>clear levelpassword
>
Example This example shows how to clear the local authentication database to factory default
settings.
>clear username
>
Parameters None.
Default None.
Command Mode EXEC Mode in Password Recover Mode.
Command Default Level Level: 1
Usage Guideline Used to reboot the switch.