manualshive.com logo in svg

D-Link DXS-3600-16S, Manual

The D-Link DXS-3600-16S is a high-performance switch with advanced features. Unlock its full potential with our comprehensive user manual, available for download free of charge at manualshive.com. This manual offers step-by-step instructions and valuable insights for seamless integration and optimized performance of your DXS-3600-16S.

Share
Download
background image

DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide

577

Example

This example shows the storm control information for all interfaces.

DXS-3600-32S#show storm-control

Function Version  : 1.01

Storm Control Statistic Interval: 5(seconds)

Interface Type      Lower         Upper        Action    Status

--------- --------- ------------- ------------ --------- ---------

TenGigabitEthernet1/0/1     Broadcast 100 pps       200 pps      Shutdown  Normal

TenGigabitEthernet1/0/2     Broadcast 10 %          50 %         Shutdown  Shutdown

TenGigabitEthernet1/0/3     Broadcast 50 %          90 %         Drop      Drop

TenGigabitEthernet1/0/4     Broadcast -             -            Block     Disabled

TenGigabitEthernet1/0/5     Broadcast 200 pps       500 pps      None      None

TenGigabitEthernet1/0/6     Broadcast -             -            Drop      Disabled

TenGigabitEthernet1/0/7     Broadcast -             -            Drop      Disabled

TenGigabitEthernet1/0/8     Broadcast -             -            Drop      Disabled

TenGigabitEthernet1/0/9     Broadcast -             -            Drop      Disabled

TenGigabitEthernet1/0/10    Broadcast -             -            Drop      Disabled

TenGigabitEthernet1/0/11    Broadcast -             -            Drop      Disabled

TenGigabitEthernet1/0/12    Broadcast -             -            Drop      Disabled

TenGigabitEthernet1/0/13    Broadcast -             -            Drop      Disabled

TenGigabitEthernet1/0/14    Broadcast -             -            Drop      Disabled

TenGigabitEthernet1/0/15    Broadcast -             -            Drop      Disabled

TenGigabitEthernet1/0/16    Broadcast -             -            Drop      Disabled

TenGigabitEthernet1/0/17    Broadcast -             -            Drop      Disabled

TenGigabitEthernet1/0/18    Broadcast -             -            Drop      Disabled

TenGigabitEthernet1/0/19    Broadcast -             -            Drop      Disabled

TenGigabitEthernet1/0/20    Broadcast -             -            Drop      Disabled

TenGigabitEthernet1/0/21    Broadcast -             -            Drop      Disabled

TenGigabitEthernet1/0/22    Broadcast -             -            Drop      Disabled

TenGigabitEthernet1/0/23    Broadcast -             -            Drop      Disabled

TenGigabitEthernet1/0/24    Broadcast -             -            Drop      Disabled

DXS-3600-32S#

Example

This example shows the storm control information for a specified type and interface.

DXS-3600-32S#show storm-control interface tenGigabitEthernet 1/0/1 multicast

Function Version  : 1.01

Storm Control Statistic Interval: 5(seconds)

Interface Type      Lower         Upper        Action    Status

--------- --------- ------------- ------------ --------- ---------

TenGigabitEthernet1/0/1     Multicast 500 pps       1000 pps     Shutdown  Normal

DXS-3600-32S#

Display Parameters

Description

Type

Displays the storm packet type:

Broadcast

 - broadcast packet.

Multicast

 - multicast packet.

Unicast

 - unicast packet.

Status

Displays the status of the filter:

Normal

 - Storm control is enabled, and no storms have occurred

Block

 - Storm control is enabled, a storm has occurred, and has blocked the 

storm.

Shutdown

 - Storm control is enabled, a storm has occurred, and has shutdown 

the interface.

Drop

 - Storm control is enabled, discard packets that exceed the rise threshold

None

 - Storm control is detected, but not filter storm packets.

Disabled

 - Storm control is disabled.

Summary of Contents for DXS-3600-16S
























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DXS-3600-16S

La Toulousaine 1400 Installation Manual preview
1400
Brand: La Toulousaine Pages: 6
Ubisys S1 Reference Manual preview
S1
Brand: Ubisys Pages: 40
OFFICINE OROBICHE PL Series Instruction Manual preview
PL Series
Brand: OFFICINE OROBICHE Pages: 7
BABBITT LS8000 Owner'S Manual preview
LS8000
Brand: BABBITT Pages: 14
BABBITT LS6000 Owner'S Manual preview
LS6000
Brand: BABBITT Pages: 10
Hama 78499 Operating Instructions Manual preview
78499
Brand: Hama Pages: 10
Hama 11467 Operating Instruction preview
11467
Brand: Hama Pages: 14
Under Control 2918 Instructions For Use Manual preview
2918
Brand: Under Control Pages: 9
Cabletron Systems SmartSwitch 6500 Installation And Setup Manual preview
SmartSwitch 6500
Brand: Cabletron Systems Pages: 62
ASTEK A51606-SW Quick Start Manual preview
A51606-SW
Brand: ASTEK Pages: 3
3Com 3C16710 - OfficeConnect 8/TPM Hub User Manual preview
3C16710 - OfficeConnect 8/TPM Hub
Brand: 3Com Pages: 130
Velleman HQ-Power VMS4 Manual preview
HQ-Power VMS4
Brand: Velleman Pages: 5
Eaton STS 2000A Installation And Operation Manual preview
STS 2000A
Brand: Eaton Pages: 120
TeleAdapt MediaHub Mini TA-3350 Installation Manual preview
MediaHub Mini TA-3350
Brand: TeleAdapt Pages: 23
AMAV VS81 Installation And Operation Manual preview
VS81
Brand: AMAV Pages: 8
hager EG170 User Instruction preview
EG170
Brand: hager Pages: 2
Rackmount U-1601 User Manual preview
U-1601
Brand: Rackmount Pages: 16
B&B Electronics UHR304 Quick Start Manual preview
UHR304
Brand: B&B Electronics Pages: 2

Brands by name

Popular brands

Load more brands