D-Link DXS-3600-16S, Manual

Page: 563 / 695

DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
555
56-8 show clock
This command is used to display the time and date from the system clock.
show clock [detail]
Parameters
Command Default Level Level: 8
Usage Guideline In both the date and repeating forms of the command, the first part of the command
specifies when summer time begins, and the second part specifies when it ends. All
times are relative to the local time zone. The start time is relative to standard time.
The end time is relative to summer time. If the starting month is chronologically after
the ending month, the system assumes that you are in the southern hemisphere.
You can verify your settings by entering the show clock command.
Example This example shows how to specify that the summer time starts on the first Sunday
in April at 2 a.m. and ends on the last Sunday in October at 2 a.m.
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#clock summer-time repeating 1 sun 4 2:00 last sun 10 2:00
DXS-3600-32S(config)#
Example This example shows how to specify the exact date and time. In the following
example, the daylight saving time (summer time) is configured to start on 2011
October 12 at 2 a.m., and end on 2012 April 26 at 2 a.m.
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#clock summer-time date 12oct2011 2:00 26apr2012 2:00
DXS-3600-32S(config)#
detail (Optional) Specifies the clock source (NTP, SNTP, hardware clock, and so on) and
the current summer-time setting (if any).
Default None.
Command Mode Privileged EXEC Mode.
Command Default Level Level: 3
Usage Guideline Use this command to show clock setting, time zone setting and summer time setting.
Example This example shows the output from the show clock command.
DXS-3600-32S#show clock detail
Current Time Source : System Clock
Boot Time : 23 Dec 2011 05:40:42
Current Time : 23 Dec 2011 06:56:25
Time Zone : UTC -08:00
Summer Time : Date
Date From : 12 Oct 2011 02:00
To : 26 Apr 2012 02:00
Offset In Minutes : 60
DXS-3600-32S#