D-Link DXS-3400 SERIES Web Ui Reference Manual Download Page 77

Page: 77 / 490

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide

DHCPv6 Relay

DHCPv6 Relay Global Settings

This window is used to display and configure the DHCPv6 relay remote ID settings.

To view the following window, click

Management > DHCP > DHCPv6 Relay > DHCPv6 Relay Global Settings

, as

shown below:

Figure 4-55 DHCPv6 Relay Global Settings Window

The fields that can be configured are described below:

Parameter

Description

IPv6 DHCP Relay Remote
ID Format

Select to choose the sub-type of the remote ID. Options to choose from are

Default

CID with User Define

, and

User Define

IPv6 DHCP Relay Remote
ID UDF

Select to choose the User Define Field (UDF) for remote ID. Options to choose
from are

ASCII

, and

Hex

•

ASCII

- Select to enter the ASCII string with a maximum of 128 characters in

the text box.

•

HEX

- Select to enter the hexadecimal string with a maximum of 256

characters in the text box.

IPv6 DHCP Relay Remote
ID Policy

Select to choose Option 37 forwarding policy for the DHCPv6 relay agent. Options
to choose from are

Keep

, and

Drop

•

Keep

- Select that the DHCPv6 request packet that already has the relay

agent Remote-ID option is left unchanged and directly relayed to the
DHCPv6 server.

•

Drop

- Select to discard the packet that already has the relay agent Remote-

ID Option 37.

IPv6 DHCP Relay Remote
ID Option

Select this option to enable or disable the insertion of the relay agent remote ID
Option 37 during the relay of DHCP for IPv6 request packets.

Click the

Apply

button to accept the changes made.

DHCPv6 Relay Interface Settings

This window is used to display and configure the DHCPv6 relay interface settings.

To view the following window, click

Management > DHCP > DHCPv6 Relay > DHCPv6 Relay Interface Settings

, as

shown below:

Summary of Contents for DXS-3400 SERIES











































































































































































































































































































































































































































































































Search results

Summary of Contents for DXS-3400 SERIES

Reviews:

Related manuals for DXS-3400 SERIES

Brands by name

Popular brands

D-Link DXS-3400 SERIES, Web Ui Reference Manual

Search results

Summary of Contents for DXS-3400 SERIES

Reviews:

Related manuals for DXS-3400 SERIES

Brands by name

Popular brands