DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
36
SNMP Group Table Settings
An SNMP Group created with this table maps SNMP users (identified in the SNMP User Table) to the views created in
the previous window.
To view the following window, click
Management > SNMP > SNMP Group Table Settings
, as shown below:
Figure 4-11 SNMP Group Table Settings Window
The fields that can be configured are described below:
Parameter
Description
Group Name
Enter the group name of a maximum of 32 characters. The syntax is general
string that does not allow space.
Read View Name
Enter the read view name that the group user can access.
User-based Security Model
Select the security model here. Options to choose from are
SNMPv1
,
SNMPv2c
,
and
SNMPv3
.
•
SNMPv1
- Select to allow the group user to use the SNMPv1 security model.
•
SNMPv2c
- Select to allow the group user to use the SNMPv2c security
model.
•
SNMPv3
- Select to allow the group user to use the SNMPv3 security model.
Write View Name
Enter the write view name that the group user can access.
Security Level
When selecting
SNMPv3
in the
User-based Security Model
drop-down list, this
option is available.
•
NoAuthNoPriv
- Specify that there will be no authorization and no
encryption of packets sent between the Switch and a remote SNMP
manager.
•
AuthNoPriv
- Specify that authorization will be required, but there will be no
encryption of packets sent between the Switch and a remote SNMP
manager.
•
AuthPriv
- Specify that authorization will be required, and that packets sent
between the Switch and a remote SNMP manger will be encrypted.
Notify View Name
Enter a write view name that the group user can access. The notify view
describes the object that can be reported its status via trap packets to the group
user.
IP Address-List Name
Enter the standard IP access control list (ACL) to associate with the group.
Click the
Add
button to add a new entry based on the information entered.
Summary of Contents for DXS-3400 SERIES
Page 1: ......
