DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
131
Parameter
Description
Unit
Select the Switch’s unit ID that will be used here.
From Port ~ To Port
Select the Switch’s port range that will be used here.
Trust Inner Priority
Select to enable or disable the 802.1Q inner trust priority feature here. When the
trusting priority option, on an 802.1Q tunnel port, is enabled the priority of the
VLAN tag in the received packets will be copied to the service VLAN tag.
Miss Drop
Select to enable or disable the miss drop feature here. If the VLAN mapping miss
drop option is enabled on the receiving port, when the original VLAN of the
received packets cannot match the VLAN mapping entries or rules on this port,
the received packets will be dropped.
Insert Dot1q Tag
Enter the 802.1Q VLAN ID that is inserted to the untagged packets which are
received on the 802.1Q tunnel port(s) here. The range is from 1 to 4094.
VLAN Mapping Profile
Enter the ID of the VLAN mapping profile here. A lower ID has a higher priority.
The ID range is from 1 to 1000.
Action
Select
Add
to add a new entry based in the information entered.
Select
Remove
to remove an entry based in the information entered.
Click the
Apply
button to accept the changes made.
VLAN Mapping
This window is used to display and configure the VLAN mapping settings. If a profile is applied on an interface, the
Switch matches the incoming packets according to the rules of the profile. If the packets match a rule, the action of the
rule will be taken. The action may be adding or replacing the outer-VID. Optionally, specify the priority of the new
outer-TAG or specify the packets new inner-VID.
The match order depends on the rule’s sequence number of the profile and stopped when first matched. If the
sequence number is not specified, it will be allocated automatically. The sequence number begins from 10 and the
increment is 10. Multiple different types of profiles could be configured onto one interface.
To view the following window, click
L2 Features > VLAN Tunnel > VLAN Mapping
, as shown below:
Figure 5-42 VLAN Mapping Settings Window
The fields that can be configured are described below:
Parameter
Description
Unit
Select the Switch’s unit ID that will be used here.
From Port ~ To Port
Select the Switch’s port range that will be used here.
Port
Select the Switch’s port that will be used for the search here.
Original VID List
Enter the original VLAN’s ID list here. The range is from 1 to 4094.
Summary of Contents for DXS-3400 SERIES
Page 1: ......
