DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
105
Parameter
Description
series of VLAN IDs can be entered separated by commas or a range of VLAN IDs
can be entered separated by a hyphen.
Status
Select to enable or disable the MAC address learning function on the VLAN(s)
specified here.
Click the
Apply
button to accept the changes made.
Click the
Find
button to locate a specific entry based on the information entered.
Click the
Show All
button to display all the available entries.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
MAC Address Table
This window is used to display the entries listed in the MAC address table.
To view the following window, click
L2 Features > FDB > MAC Address Table
, as shown below:
Figure 5-6 MAC Address Table Window
The fields that can be configured are described below:
Parameter
Description
Port
Select the stacking unit ID and the port number of the Switch that will be
configured here.
VID
Enter the VLAN ID that will be used for this configuration here.
MAC Address
Enter the MAC address that will be used for this configuration here.
Click the
Clear Dynamic by Port
button to clear the dynamic MAC address listed on the corresponding port.
Click the
Clear Dynamic by VLAN
button to clear the dynamic MAC address listed on the corresponding VLAN.
Click the
Clear Dynamic by MAC
button to clear the dynamic MAC address entered.
Click the
Find
button to locate a specific entry based on the information entered.
Click the
Clear All
button to clear all dynamic MAC addresses.
Click the
Show All
button to display all the MAC addresses recorded in the MAC address table.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
MAC Notification
This window is used to display and configure MAC notification.
To view the following window, click
L2 Features > FDB > MAC Notification
, as shown below:
Summary of Contents for DXS-3400 SERIES
Page 1: ......
