DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
334
Figure 9-58 IPv6 RA Guard Window
The fields that can be configured are described below:
Parameter
Description
Policy Name
Enter the policy name here. This name can be up to 32 characters long.
Device Role
Select the device role here. Options to choose from are
Host
and
Router
. By
default, the device's role is
Host
, which will block all the RA packets. If the
device's role is
Router
, RA packets will be forwarded according to the port's
bound ACL.
Match IPv6 Access List
Enter or select the IPv6 access list to match here. Click the
Please Select
button
to select an existing ACL from the list.
Target Port
Tick this option to specify the target port.
Unit
Select the Switch unit that will be used for this configuration here.
From Port ~ To Port
Select the appropriate port range used for the configuration here.
Click the
Apply
button to accept the changes made.
Click the
Edit
button to re-configure the specific entry.
Click the
Delete
button to remove the specified entry.
After clicking the
Please Select
button, the following window will appear:
Figure 9-59 IPv6 RA Guard (Please Select) Window
Select the radio button next to the entry to use that ACL in the configuration.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
Click the
OK
button to accept the selection made.
IPv6 DHCP Guard
This window is used to display and configure the IPv6 DHCP guard settings.
To view the following window, click
Security > IMPB > IPv6 > IPv6 DHCP Guard
, as shown below:
Summary of Contents for DXS-3400 SERIES
Page 1: ......
