DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
413
The fields that can be configured are described below:
Parameter
Description
Unit
Select the Switch unit that will be used for this configuration here.
From Port ~ To Port
Select the appropriate port range used for the configuration here.
Instance
Enter the instance’s index number if multiple samplers are associated with one
interface. The valid range is from 1 to 65535.
Receiver
Enter the receiver’s index value for this poller here. This value must be between 1
and 4.
Interval
Enter the maximum number of seconds between successive polling samples. This
value must be between 0 and 120 seconds. Entering 0 will disable this feature. By
default this value is 0.
Click the
Apply
button to accept the changes made.
Click the
Delete
button to remove the specified entry.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
Device Environment
The device environment feature displays the Switch internal temperature status.
To view the following window, click
Monitoring > Device Environment
, as shown below:
Figure 11-22 Device Environment Window
External Alarm Settings
This window is used to display and configure the external alarm settings. This is used to enable monitoring the
external alarm source status or to configure external alarm message for a channel. The source of alarm is located
outside of the Switch and is monitored via pre-defined connecting channels. Each channel represents a specific alarm
event. The status of an alarm source can be either in the alarm state or in the normal state. If the source is absent or
the source is present and in the normal state, the status will be normal. The status will be abnormal if the source is in
the abnormal state. A notification will be sent when the monitoring status is changed.
To view the following window, click
Monitoring > External Alarm Settings
, as shown below:
Summary of Contents for DXS-3400 SERIES
Page 1: ......
