DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
168
To view the following window, click
L2 Features > L2 Multicast Control > MLD Snooping > MLD Snooping Filter
Settings
, as shown below:
Figure 5-78 MLD Snooping Filter Settings Window
The fields that can be configured in
MLD Snooping Rate Limit Settings
are described below:
Parameter
Description
Unit
Select the Switch’s unit ID that will be used here.
From Port ~ To Port
Select the Switch’s port range that will be used here. This is only available if the
Port
option was selected as the action below.
Limit Number
Enter the limit number here. This is to configure the rate of MLD control packets
that the Switch can process on a specific interface. The range is from 1 to 1000
packets per second. Select the
No Limit
option to remove the limitation.
Action
Select the action that will be taken here. Options to choose from are
Port
and
VLAN
.
VID
Enter the VLAN’s ID here. This is the Layer 2 VLAN on a trunk port and applies
the filter to packets that arrive on that VLAN. The range is from 1 to 4094. This is
only available if the
VLAN
option was selected as the action.
Click the
Apply
button to accept the changes made.
The fields that can be configured in
MLD Snooping Limit Settings
are described below:
Parameter
Description
Unit
Select the Switch unit that will be used for this configuration here.
Summary of Contents for DXS-3400 SERIES
Page 1: ......
