DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
229
Parameter
Description
environment. Using bandwidth allocations, different traffic classes within
different traffic types such as LAN, SAN, IPC and management can be
configured to provide bandwidth allocation, low-latency or best effort transmit
characteristics.
Click the
Apply
button to accept the changes made.
Queue Settings
This window is used to display and configure the queue settings.
To view the following window, click
QoS > Basic Settings > Queue Settings
, as shown below:
Figure 7-3 Queue Settings Window
The fields that can be configured are described below:
Parameter
Description
Unit
Select the Switch unit that will be used for this configuration here.
From Port ~ To Port
Select the range of ports that will be used for this configuration here.
Queue ID
Enter the queue ID value here. This value must be between 0 and 7.
WRR Weight
Enter the WRR weight value here. This value must be between 0 and 127. To
satisfy the behavior requirements of Expedited Forwarding (EF), the highest
queue is always selected by the Per-hop Behavior (PHB) EF and the schedule
mode of this queue should be strict priority scheduling. So the weight of the last
queue should be zero while the Differentiate Service is supported.
WDRR Quantum
Enter the WDRR quantum value here. This value must be between 0 and 127.
Click the
Apply
button to accept the changes made.
CoS to Queue Mapping
This window is used to display and configure the CoS-to-Queue mapping settings.
Summary of Contents for DXS-3400 SERIES
Page 1: ......
