D-Link DXS-3227 - xStack Switch - Stackable, Web/Installation Manual

Page: 329 / 424

DXS-3227, DXS-3227P, DXS-3250 and DXS-3250E EWS User Guide
Page 328
Enabling System Logs
The Syslog Properties Page contains fields for defining which events are recorded to which logs. It contains fields
for enabling logs globally, and parameters for defining logs. Log messages are listed from the highest severity to
the lowest severity level. To define system log parameters:
Figure 230:Syslog Properties Page
The Syslog Properties Page contains the following fields:
•
Enable Logging — Indicates if device logs are enabled globally. The possible field values are:
–
Checked — Enables device logs.
–
Unchecked — Disables device logs.
•
Severity — The following are the available log severity levels:
–
Emergency — The highest warning level. If the device is down or not functioning properly, an emergency
log message is saved to the specified logging location.
–
Alert — The second highest warning level. An alert log is saved, if there is a serious device malfunction;
for example, all device features are down.
–
Critical — The third highest warning level. A critical log is saved if a critical device malfunction occurs; for
example, two device ports are not functioning, while the rest of the device ports remain functional.
–
Error — A device error has occurred, for example, if a single port is offline.