D-Link DXS-3227 - xStack Switch - Stackable Page 351 Web/Installation Manual Download

Page: 351 / 424

DXS-3227, DXS-3227P, DXS-3250 and DXS-3250E EWS User Guide

Page 350

•

Enable Receive Anycast Servers Updates

—

Defines whether or not the device polls the SNTP server for

Anycast server time information. If both the Enable Receive Anycast Servers Update and the

Enable Receive

Broadcast Servers Update

fields are enabled, the system time is set according to the Anycast server time

information. The possible values are:

–

Checked

— Enables the device to receive Anycast server updates.

–

Unchecked

— Disables the device from receiving Anycast server updates. This is the default value.

•

Enable Receive Unicast Servers Updates

— Defines whether or not the device polls the SNTP server for

Unicast server time information. If the

Enable Receive Broadcast Servers Updates

Enable Receive Anycast

Servers Updates

, and

Enable Receive Unicast Servers Updates

fields are all enabled, the system time is set

according to the Unicast server time information. The possible values are:

–

Checked

— Enables the device to receive Unicast server updates.

–

Unchecked

— Disables the device from receiving Unicast server updates. This is the default value.

•

Enable Poll Unicast Servers

— Defines whether or not the device sends SNTP Unicast forwarding informa-

tion to the SNTP server. The possible values are:

–

Checked

— Enables the device to receive Poll

Unicast server updates.

–

Unchecked

— Disables the device from receiving Poll

Unicast server updates. This is the default value.

Define the fields.

Click

. The SNTP global settings are defined, and the device is updated.

Summary of Contents for DXS-3227 - xStack Switch - Stackable








































































































































































































































































































































































































































Search results

Summary of Contents for DXS-3227 - xStack Switch - Stackable

Reviews:

Related manuals for DXS-3227 - xStack Switch - Stackable

Brands by name

Popular brands

D-Link DXS-3227 - xStack Switch - Stackable, Web/Installation Manual

Search results

Summary of Contents for DXS-3227 - xStack Switch - Stackable

Reviews:

Related manuals for DXS-3227 - xStack Switch - Stackable

Brands by name

Popular brands