4 Configuration
D-Link DXS-1210 Series User Manual
86
DSCP (0-63):
Enter the DSCP value. And the range is between 0 and 63.
Flow Label (0-1048575):
Enter
the flow label value. This value must be between 0 and 1048575.
Action:
Select the action for the rule. The values are
Permit
and
Deny
.
After selecting the
None
option as the
Protocol Type
then click the associated tabs with
IPv6 Address
,
IPv6 DSCP
and
Flow Label,
the following page will appear:
Figure 4.144 – ACL > ACL Configuration Wizard – Create IPv6 ACL-None
Source:
Select the source information. The values are
Any
,
Host
and
IP
.
Destination:
Select the destination information. The values are
Any
,
Host
and
IP
.
DSCP (0-63):
Enter the DSCP value. And the range is between 0 and 63.
Flow Label (0-1048575):
Enter
the flow label value. This value must be between 0 and 1048575.
Time Range:
Enter the time range.
Action:
Select the action for the rule. The values are
Permit
and
Deny
.
Click the
Back
button to return to the previous window.
Click the
Next
button to continue.
After clicking the
Next
button, the following page will appear.
Figure 4.145 – ACL > ACL Configuration Wizard – Create IPv6 ACL-Next
From Port / To Port:
Select the range of ports to be configured.
Direction:
Select either
In
or
Out
.
Click the
Back
button to return to the previous window.
Click the
Apply
button to save your settings.
Summary of Contents for DXS-1210 Series
Page 2: ......
Page 23: ...4 Configuration D Link DXS 1210 Series User Manual 1 17 7 Figure 4 24 User Guide Micro Site ...
Page 119: ......
