4 Configuration
D-Link DXS-1210 Series User Manual
22
Figure 4.33 – System > System Log > System Log Server Settings
IP Address:
Select and enter the IPv4 address or IPv6 Address.
UDP Port (514 or 1024-65535):
Enter the system log server’s UDP port number. This value must be 514 or
between 1024 and 65535. The default value is 514.
Severity:
Select the severity value of the type of information that will be logged. Options to choose from are
0 (Emergencies)
,
1 (Alerts)
,
2 (Critical)
,
3 (Errors)
,
4 (Warnings)
,
5 (Notifications)
,
6 (Informational)
,
and
7 (Debugging)
.
Facility:
Select the facility value. The values must be between 0 and 23.
Click the
Apply
button to save your settings.
System > System Log > System Log
The System Log page displays the system logs on the Switch.
Figure 4.34 – System > System Log > System Log
System > Time and SNTP > Clock Settings
The Clock Settings page allows you to configure the time settings for the Switch.
Figure 4.35 – System > Time and SNTP > Clock Settings
Time (HH:MM:SS):
Enter the current time in hours, minutes, and seconds.
Data (DD/MM/YYYY):
Enter the current day, month, and year to update the system clock.
Click the
Apply
button to save your settings.
System > Time and SNTP > Time Zone Settings
The Time Zone Settings page allows you to configure time zones and Daylight Saving Time settings for
SNTP.
Summary of Contents for DXS-1210 Series
Page 2: ......
Page 23: ...4 Configuration D Link DXS 1210 Series User Manual 1 17 7 Figure 4 24 User Guide Micro Site ...
Page 119: ......