4 Configuration
D-Link DXS-1210 Series User Manual
46
Robustness Value (1-7):
Enter the robustness variable used in IGMP snooping.
Last Member Query Interval (1-25):
Enter the interval at which the IGMP snooping querier sends IGMP
group-specific or group-source-specific query messages.
Click the
Apply
button to save your settings.
L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping Groups Settings
The IGMP snooping Groups Settings page allows you to configure and view the IGMP snooping static group,
and view IGMP snooping group.
Figure 4.77 – L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping Group Settings
VID (1-4094):
Enter the VLAN ID.
Group Address:
Enter the IP multicast group address.
From Port / To Port:
Select the range of ports to be configured.
Click the
Apply
button to save your settings.
Click the
Delete
button to remove the specified entry.
Click the
Find
button to locate a specific entry based on the information entered.
Click the
Find All
button to view all the entries.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
The fields that can be configured for
IGMP Snooping Groups Table
are described below:
IGMP Snooping Group Table:
VID (1-4094):
Specify the VLAN ID.
Group Address:
Click the radio button and enter an IP multicast group address.
Click the
Find
button to locate a specific entry based on the information entered.
Click the
Find All
button to view all the entries.
L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping Mrouter Settings
The IGMP Snooping Mrouter Settings page allows you to configure the specified interface(s) as the multicast
router ports or as forbidden to be multicast router ports on the Switch.
Summary of Contents for DXS-1210 Series
Page 2: ......
Page 23: ...4 Configuration D Link DXS 1210 Series User Manual 1 17 7 Figure 4 24 User Guide Micro Site ...
Page 119: ......
