D-Link DXS-1210 Series User Manual Download Page 54

Page: 54 / 119

4 Configuration

D-Link DXS-1210 Series User Manual

Click the

Find

button to locate a specific entry based on the information entered.

Click the

Find All

button to view all the entries.

L2 Features > L2 Multicast Control > MLD Snooping > MLD Snooping Setting

The MLD Snooping Settings page allows you to configure the MLD snooping settings.

Figure 4.80 – L2 Features > L2 Multicast Control > MLD Snooping > MLD Snooping Setting

Global Settings:

Global State:

Select to enable or disable the MLD Snooping state.

Click the

Apply

button to save your settings.

VLAN Status Settings:

VID (1-4094):

Enter the VLAN ID and select to enable or disable MLD snooping on the VLAN.

Click the

Apply

button to save your settings.

MLD Snooping Table:

VID (1-4094):

Enter the VLAN ID to be searched.

Click the

Find

button to locate a specific entry based on the information entered.

Click the

Find All

button to view all the entries.

Click the

Show Detail

button to see the detail information of the specific VLAN.

Click the

Edit

button to re-configure the specific entry.

After clicking the

Show Detail

button, the following window will appear.

Summary of Contents for DXS-1210 Series
























































































































Search results

Summary of Contents for DXS-1210 Series

Reviews:

Related manuals for DXS-1210 Series

Brands by name

Popular brands

D-Link DXS-1210 Series, User Manual

Search results

Summary of Contents for DXS-1210 Series

Reviews:

Related manuals for DXS-1210 Series

Brands by name

Popular brands