4 Configuration
D-Link DXS-1210 Series User Manual
44
Destination IP
. By default, this option is
Source MAC
.
System ID:
The
System ID
information.
Click the
Apply
button to save your settings.
Channel Group Information:
From Port / To Port:
Select
the appropriate port range used for the configuration.
Group ID:
Enter
the channel group number. This value must be between 1 and 32. The system will
automatically create the port-channel when a physical port first joins a channel group. An interface can only
join one channel-group.
Mode:
Select
either
On
,
Active
, or
Passive
. If you selected
On
, the channel group type is static. If
Active
or
Passive
is selected, the channel group type is LACP. A channel group can only consist of either static
members or LACP members. Once the type of channel group has been determined, other types of interfaces
cannot join the channel group.
Click the
Add
button to add a new entry based on the information entered.
Click the
Delete Member Port
button to remove the specific member port.
Click the
Delete Channel
button to remove the specific entry.
Click the
Channel Detail
button to view more detailed information about the channel.
L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping Settings
With Internet Group Management Protocol (IGMP) snooping, the DXS-1210 Series Switch can make
intelligent multicast forwarding decisions by examining the contents of each frame’s Layer 2 MAC header.
IGMP snooping can help reduce cluttered traffic on the LAN. With IGMP snooping enabled globally, the
DXS-1210 Series Switch will forward multicast traffic only to connections that have group members attached.
The settings of IGMP snooping is set by each VLAN individually.
Figure 4.74 – L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping Settings
Global Settings:
Global State:
Select to enable or disable the IGMP Snooping global state.
Click the
Apply
button to save your settings.
VLAN Status Settings:
VID (1-4094):
Enter the VLAN ID and select to enable or disable the IGMP snooping on the VLAN.
Click the
Apply
button to save your settings.
IGMP Snooping Table:
VID (1-4094):
Enter the VLAN ID between 1 and 4094.
Click the
Find
button to display a specific entry based on the information entered.
Click the
Find All
button to display all the entries.
Click the
Show Detail
button to display the detail information of the specified VLAN.
Summary of Contents for DXS-1210 Series
Page 2: ......
Page 23: ...4 Configuration D Link DXS 1210 Series User Manual 1 17 7 Figure 4 24 User Guide Micro Site ...
Page 119: ......