4 Configuration
D-Link DXS-1210 Series User Manual
72
Figure 4.124 – ACL > ACL Configuration Wizard – Create IPv4 ACL-UDP
Source:
Select the source information. The values are
Any
,
Host
and
IP
.
Destination:
Select the destination information. The values are
Any
,
Host
and
IP
.
Source Port:
Select the source port value.
Destination Port:
Select the destination port value.
IP Precedence:
Select the IP precedence value. Options to choose from are
0 (routine)
,
1 (priority)
,
2,
(immediate)
,
3 (flash)
,
4 (flash-override)
,
5 (critical)
,
6 (internet)
, and
7 (network)
.
ToS:
Specify the Type-of-Service (
ToS
) value that will be used. Options to choose from are
0 (normal)
,
1
(min-monetary-cost)
,
2 (max-reliability)
,
3
,
4 (max-throughput)
,
5
,
6
,
7
,
8 (min-delay)
,
9
,
10
,
11
,
12
,
13
,
14
, and
15
.
DSCP (0-63):
Enter the DSCP value. And the range is between 0 and 63.
TCP Flag:
Select the appropriate TCP flag option to include the flag in this rule. Options to choose from are
ack
,
fin
,
psh
,
rst
,
syn
, and
urg
.
Time Range:
Enter the time range.
Action:
Select the action for the rule. The values are
Permit
and
Deny
.
After selecting the
ICMP
option as the
Protocol Type
then click the associated tabs with
IPv4 Address
,
ICMP
and
IPv4 DSCP
, the following page will appear:
Summary of Contents for DXS-1210 Series
Page 2: ......
Page 23: ...4 Configuration D Link DXS 1210 Series User Manual 1 17 7 Figure 4 24 User Guide Micro Site ...
Page 119: ......
