D-Link 10 Gigabit Ethernet Switch User Manual
3
3
4
4
Write Delay:
Enter the interval for periodic writing of the logging buffer to FLASH. This value must be
between 0 and 65535 seconds. By default, this value is 300 seconds. Tick
Infinite
to disable the write delay
feature.
Click
Apply
to accept the changes made for each individual section.
System > System Log > System Log Discriminator Settings
This window is used to view and configure the system log’s discriminator settings.
Figure 4.35 – System > System Log > System Log Discriminator Settings
The fields that can be configured are described below:
Discriminator Name:
Enter the discriminator name here. This name can be up to 15 characters long.
Action:
Select the facility’s behavior option and the type of facility that will be associated with the selected
behavior here. Behavior options to choose from are
Drops
and
Includes
.
Severity:
Select the severity behavior option and the value of the type of information that will be logged.
Behavior options to choose from are
Drops
and
Includes
. Severity value options to choose from are
0
(Emergencies)
,
1 (Alerts)
,
2 (Critical)
,
3 (Errors)
,
4 (Warnings)
,
5 (Notifications)
,
6 (Informational)
, and
7 (Debugging)
.
Click
Apply
to accept the changes made.
Click
Delete
to remove the specified entry.
System > System Log > System Log Server Settings
This window is used to view and configure system log’s server settings.
Figure 4.36 – System > System Log > System Log Server Settings
The fields that can be configured are described below:
Host IPv4 Address:
Specifies the IPv4 address of the system log server.
Host IPv6 Address:
Specifies the IPv6 address of the system log server.
