D-Link 10 Gigabit Ethernet Switch User Manual
1
1
9
9
Web-based Management
After clicking
Exit
in Smart Wizard, you will see the screen below:
Figure 4.4 – Web-based Management
The above image is the Web-based Management screen. The three main areas are the
Tool Bar
on top, the
Function Tree
, and the
Main Configuration Screen
.
The
Tool Bar
provides a quick and convenient way for essential utility functions like firmware and
configuration management on the left, and the username with current IP address and the
Logout
button on
the right. Click
Logout
to end this session.
NOTE:
If you close the web browser without
clicking the
Logout
button first, then it will be seen
as an abnormal exit and the login session will still
be occupied.
By choosing different functions in the
Function Tree
, you can change all the settings in the
Main
Configuration Screen
. The main configuration screen will show the current status of your Switch by clicking
the model name on top of the function tree.
Finally, by clicking the D-Link logo at the upper-left corner of the screen you will be redirected to the D-Link
website.
Function Tree
Main Configuration Screen
Tool Bar
