D-Link DWS-3024L User Manual Download

Page: 243 / 268

243

Technical Support

Technische Unterstützung

Aktualisierte Versionen von Software und Benutzerhandbuch finden

Sie auf der Website von D-Link.

D-Link bietet kostenfreie technische Unterstützung für Kunden

innerhalb Deutschlands, Österreichs, der Schweiz und Osteuropas.

Unsere Kunden können technische Unterstützung über unsere

Website, per E-Mail oder telefonisch anfordern.

Web: http://www.dlink.de

E-Mail: [email protected]

Telefon: +49 (1805)2787

0,12€/Min aus dem Festnetz der Deutschen Telekom.

Telefonische technische Unterstützung erhalten Sie Montags bis Freitags

von 09.00 bis 17.30 Uhr.

Unterstützung erhalten Sie auch bei der Premiumhotline für D-Link

Produkte unter der Rufnummer 09001-475767

Montag bis Freitag von 6-22 Uhr und am Wochenende von 11-18 Uhr.

1,75

€

€ /Min aus dem Festnetz der Deutschen Telekom.

Wenn Sie Kunde von D-Link außerhalb Deutschlands, Österreichs, der

Schweiz und Osteuropas sind, wenden Sie sich bitte an die zuständige

Niederlassung aus der Liste im Benutzerhandbuch.

Summary of Contents for DWS-3024L



































































































































































































































































Search results

Summary of Contents for DWS-3024L

Reviews:

Related manuals for DWS-3024L

Brands by name

Popular brands

D-Link DWS-3024L, User Manual

Search results

Summary of Contents for DWS-3024L

Reviews:

Related manuals for DWS-3024L

Brands by name

Popular brands