manualshive.com logo in svg

D-Link DWS-3024L, User Manual

The D-Link DWS-3024L is an advanced network switch designed for seamless connectivity. With its reliable performance and extensive features, configuring and optimizing your network has never been easier. Enhance your user experience by downloading the free user manual from our website to explore the full potential of this exceptional product.

Share
Download
background image

174    © 2001- 2008 D-Link Corporation.  All Rights Reserved.

D-Link Unified Access System User Manual

Configuring Users in the Local Database

From the Local User Configuration page, you can configure additional settings for an 

existing CP user in the local database.

Figure 79.  Local User Configuration

Table 60

 describes the fields you use to configure CP users in the local database.

Configuring Users in a Remote RADIUS Server

You can use a remote RADIUS server client authorization. You must add all users to the 
RADIUS server. The local database in the D-Link Unified Switch does not share any 
information with the remote RADIUS database. 

Table 61

 indicates the RADIUS attributes you use to configure authorized captive portal 

clients. The table indicates both RADIUS attributes and vendor-specific attributes (VSA). 
VSAs are denoted in the Attribute column and are comma delimited (vendor id, attribute id).

Table 60. 

Local User Configuration

Field

Description

User Name

Enter the name of the user.

Password

Enter a password for the user. The password length can be from 8 to 64 
characters.

User Group

Assign the user to at least one User Group. To assign a user to more than one 
group, press the Ctrl key and click each group.

New users are assigned to the 1-Default user group by default.

Session Timeout

Enter the number of seconds a user is permitted to remain connected to the 
network. Once the Session Timeout value is reached, the user is logged out 
automatically. A value of 0 means that the user does not have a Session 
Timeout limit.

Idle Timeout

Enter the number of seconds the user can remain idle before the switch 
automatically logs the user out. A value of 0 means that the user does not 
have an idle timeout limit.

Summary of Contents for DWS-3024L













































































































































































































































































Reviews:

No comments

Related manuals for DWS-3024L

Magellan RTX3 Reference And Installation Manual preview
RTX3
Brand: Magellan Pages: 24
Raymarine Base Station Operation Manual preview
Base Station
Brand: Raymarine Pages: 12
Conceptronic C54BRS4 Quick Installation Manual preview
C54BRS4
Brand: Conceptronic Pages: 121
GIGAMEDIA GGM WAPCD2 Quick Manual preview
GGM WAPCD2
Brand: GIGAMEDIA Pages: 4
Ruijie Networks RG-MAP552(SR) series Installation And Reference Manual preview
RG-MAP552(SR) series
Brand: Ruijie Networks Pages: 19
NC-link NC-AP212 User Manual preview
NC-AP212
Brand: NC-link Pages: 13
Foxconn J20H076 User Manual preview
J20H076
Brand: Foxconn Pages: 28
AMTC PW5002 User Manual preview
PW5002
Brand: AMTC Pages: 81
Tenda 6932849430219 User Manual preview
6932849430219
Brand: Tenda Pages: 115
Air Live AirMax2 Quick Setup Manual preview
AirMax2
Brand: Air Live Pages: 2
Air Live WH-5420CPE Quick Setup Manual preview
WH-5420CPE
Brand: Air Live Pages: 103
Air Live Air Live WL-5470AP Quick Setup Manual preview
Air Live WL-5470AP
Brand: Air Live Pages: 135
EnGenius EAP2200 User Manual preview
EAP2200
Brand: EnGenius Pages: 84
EnGenius ENH1350EXT User Manual preview
ENH1350EXT
Brand: EnGenius Pages: 80
EnGenius ENH500v3 User Manual preview
ENH500v3
Brand: EnGenius Pages: 85
EnGenius ECB150 Manual preview
ECB150
Brand: EnGenius Pages: 113
Vivanco AV TR 3 WIRELESS MULTIROOM AUDIO VIDEO LINK Operating Instructions Manual preview
AV TR 3 WIRELESS MULTIROOM AUDIO VIDEO LINK
Brand: Vivanco Pages: 27
Vivanco Music Station User Manual preview
Music Station
Brand: Vivanco Pages: 40

Brands by name

Popular brands

Load more brands