manualshive.com logo in svg

D-Link DWS-3024L, User Manual, Page: 120 / 268

Share
Download
D-Link DWS-3024L User Manual Download Page 120

120    © 2001- 2008 D-Link Corporation.  All Rights Reserved.

D-Link Unified Access System User Manual

The fields in 

Table 22

 appear when you click the Debug link for a managed AP on the 

Managed AP Advanced page.

Adjusting the Channel and Power

Changes you make to the channel and power are runtime changes only. If you change the 
channel or power settings, the new settings are lost if the AP or switch is reset.

The fields in 

Table 23

 appear when you click the current channel or power setting for an AP on 

the Managed AP Advanced page.

Table 22. 

AP Debug

Field

Description

MAC Address

Shows the MAC address of the access point.

Location

Shows the location of the access point, as configured in the Valid AP data-
base.

IP Address

Shows the IP address of the AP.

Status

Shows the debug status, which can be one of the following:

•

None—Debugging has not been enabled or disabled.

•

Set Requested—A request has been made to change the debug status.

•

Set Complete—Debugging has been enabled or disabled.

Password

Enter the admin password for the AP (the default is admin). 

Confirm Password

Since the password is encrypted, you must retype the password to confirm 
the password.

Enable Debug

Select or clear the Enable check box to enable or disable debugging.

Once once you Telnet to the AP, you get an AP interface login prompt. The 
user name is admin. Enter the password you set in the previous field. The 
default password is admin if you did not specify a new password. From the 
AP CLI, you can also access the standard Linux prompt by typing the '!' char-
acter.

You can issue the following debug commands at the Linux OS prompt:

•

get management

—Display management interface information

•

get managed-ap

—Display managed AP information

You can issue the following debug commands at the Linux OS prompt:

•

ifconfig

—display all interfaces.

•

cat /proc/meminfo

—View memory utilization

Table 23. 

Managed AP Channel/Power Adjust

Field

Description

AP MAC Address

Shows the MAC address of the access point.

Radio

Displays the radio and its mode. The changes apply only to this radio.

Channel Status

The status is one of the following:

•

None

•

Set Requested

•

Set Complete

Summary of Contents for DWS-3024L













































































































































































































































































Reviews:

No comments