manualshive.com logo in svg

D-Link DWS-3024L, User Manual

The D-Link DWS-3024L is an advanced network switch designed for seamless connectivity. With its reliable performance and extensive features, configuring and optimizing your network has never been easier. Enhance your user experience by downloading the free user manual from our website to explore the full potential of this exceptional product.

Share
Download
background image

60    © 2001- 2008 D-Link Corporation.  All Rights Reserved.

D-Link Unified Access System User Manual

In the following example, the administrator enables the 802.1X supplicant and sets the user 
name to wlanAP and the password to test1234. 

WLAN-AP# 

set dot1x-supplicant status up

WLAN-AP# 

set dot1x-supplicant user wlanAP

WLAN-AP# 

set dot1x-supplicant password test1234

WLAN-AP# 

get dot1x-supplicant

Property  Value
----------------
status    up
user      wlanAP

Configuring AP-to-Switch Authentication Information

You can configure a pass phrase on the AP and on the switch so that only authenticated APs 
can associate with the switch. If you do enable AP authentication on the Unified Switch, you 
must connect to the access point CLI and configure a pass phrase. This pass phrase must be the 

same as the one you configure on the Unified Switch. 

To configure the pass phrase on the AP, use the following command:

set managed-ap pass-phrase 

<phrase>

The pass phrase can be up to 32 alphanumeric characters.

For example, the following command sets the AP-to-Unified Switch authentication pass 
phrase to test1234.

WLAN-AP#

 set managed-ap pass-phrase test1234

For more information about AP-to-Unified Switch authentication and how to configure it on 
the switch, see 

“Configuring AP Authentication” 

on page 75.

Configuring VLAN Information on the Access Point

The management VLAN is VLAN 1 by default. This VLAN is also the default untagged 
VLAN. This means that all traffic, including management traffic, is untagged. 

If you want to limit access to the management interface on the access point or if you already 
have a management VLAN configured on your network with a different VLAN ID, you can 
change the VLAN ID of the management VLAN on the access point from the AP CLI.

Summary of Contents for DWS-3024L













































































































































































































































































Reviews:

No comments

Related manuals for DWS-3024L

Cambium Networks E400 Manual preview
E400
Brand: Cambium Networks Pages: 5
Cambium Networks E400 Hardware Installation Manual preview
E400
Brand: Cambium Networks Pages: 44
3Com AP9552 Datasheet preview
AP9552
Brand: 3Com Pages: 8
3Com LANplex 6000 Datasheet preview
LANplex 6000
Brand: 3Com Pages: 2
Alcatel-Lucent Enterprise OmniAccess Stellar AP1301 Series Installation Manual preview
OmniAccess Stellar AP1301 Series
Brand: Alcatel-Lucent Enterprise Pages: 2
3Com 3CRWEASYG73 - 11g Wireless LAN Outdoor Datasheet preview
3CRWEASYG73 - 11g Wireless LAN Outdoor
Brand: 3Com Pages: 4
TRENDnet TEW-815DAP User Manual preview
TEW-815DAP
Brand: TRENDnet Pages: 58
Sena Parani MSP1000 User Manual preview
Parani MSP1000
Brand: Sena Pages: 82
D-Link DSL-2730R Quick Installation Manual preview
DSL-2730R
Brand: D-Link Pages: 16
D-Link DSL Series Configuration Manual preview
DSL Series
Brand: D-Link Pages: 10
D-Link DIR-905L Quick Installation Manual preview
DIR-905L
Brand: D-Link Pages: 32
D-Link dlinkgo GO-RTW-N300 Brochure & Specs preview
dlinkgo GO-RTW-N300
Brand: D-Link Pages: 3
D-Link DSR-1000AC Quick Installation Manual preview
DSR-1000AC
Brand: D-Link Pages: 72
D-Link DIR-900L Quick Installation Manual preview
DIR-900L
Brand: D-Link Pages: 32
D-Link DIR-LX1870 Quick Installation Manual preview
DIR-LX1870
Brand: D-Link Pages: 2
D-Link DSL-2740R User Manual preview
DSL-2740R
Brand: D-Link Pages: 73
D-Link DPG-2100 - Wireless Presentation Gateway Quick Installation Manual preview
DPG-2100 - Wireless Presentation Gateway
Brand: D-Link Pages: 12
D-Link DSL 2640B Setup Manual preview
DSL 2640B
Brand: D-Link Pages: 4

Brands by name

Popular brands

Load more brands