manualshive.com logo in svg

D-Link DWS-3024L, User Manual

The D-Link DWS-3024L is an advanced network switch designed for seamless connectivity. With its reliable performance and extensive features, configuring and optimizing your network has never been easier. Enhance your user experience by downloading the free user manual from our website to explore the full potential of this exceptional product.

Share
Download
background image

Discovering Access Points and Peer Switches    67

4   Installing the D-Link Unified Access System

D-Link Access Point

On the D-Link Access Points, the default IP address is 10.90.90.91/8, and DHCP is enabled by 
default. If you do not have a DHCP server on the network, the AP retains its default IP address 
until you assign a static IP address.

You can connect to the AP CLI from a host on the 10.0.0.0/8 network by telnetting to the AP’s 
default IP address.

To set a static IP address on the AP, use the following procedures:

1. Log on to the D-Link Access Point.

For information about how to log on to the AP, see 

“Logging on to the AP” 

on page 58.

2. Enter 

get management

 to view information about the AP’s management interface.

3. Disable the DHCP client on the AP so that it does not broadcast DHCP requests.

set management dhcp-status down

4. To set the static IP address, enter the following command:

set management static-ip <

ipaddress

> static-mask 

<subnet_mask>

For example:

set management static-ip 192.168.22.133 static-mask 255.255.255.0

5. To set the default gateway, enter the following command:

set static-ip-route gateway 

<gateway_ip>

 mask 

<subnet>

 

For example, 

set static-ip-route gateway 102.168.22.1 mask 255.255.255.0 

6. From the CLI, enter 

save-running 

to save the configuration to memory.

You can use the Unified Switch as a DHCP server. If you plan to use the Unified Switch as the 
DHCP server that responds to DHCP requests from the AP, see 

“Setting the Switch 

Information in the DHCP Option” 

on page 73

Enabling the AP and Peer Switch Discovery

The D-Link Unified Switch can discover peer Unified Switches and D-Link Access Points 
regardless of whether these devices are connected to each other, located in the same Layer 2 
broadcast domain, or attached to different IP subnets.

You can enable discovery between the D-Link Access Point and D-Link Unified Switch by 
using one of following four mechanisms:

•

Use VLANs to broadcast the D-Link Wireless Device Discovery Protocol.

•

Connect to the access point CLI and manually add the IP address of the switch.

•

Configure a DHCP server to include the switch IP address in the DHCP response to the 
AP DHCP client request.

•

Manually add the IP address of the AP to the switch. Multiple peer switches might find the 
same access point. The first association always takes precedence. The AP does not change 

Summary of Contents for DWS-3024L













































































































































































































































































Reviews:

No comments

Related manuals for DWS-3024L

Nexxt Nyx300 Quick Installation Manual preview
Nyx300
Brand: Nexxt Pages: 2
VT Miltope nMAP2 Quick Start Manual preview
nMAP2
Brand: VT Miltope Pages: 32
ST STEVAL-SPBT4ATV3 Manual preview
STEVAL-SPBT4ATV3
Brand: ST Pages: 9
M Box D446559XA Operating Manual preview
D446559XA
Brand: M Box Pages: 60
H3C Magic NX15 Compliance And Safety Manual preview
Magic NX15
Brand: H3C Pages: 34
Planet WAP-1000 WireFree User Manual preview
WAP-1000 WireFree
Brand: Planet Pages: 28
H3C WA5320 Manual preview
WA5320
Brand: H3C Pages: 18
4IPNET OWL630 Quick Installation Manual preview
OWL630
Brand: 4IPNET Pages: 19
TaoTronics TT-BH07 User Manual preview
TT-BH07
Brand: TaoTronics Pages: 35
Wireless Joey Dish Installation Instructions Manual preview
Dish
Brand: Wireless Joey Pages: 20
Wireless Matrix Corporation COMMUNICATOR 1000C User Manual preview
COMMUNICATOR 1000C
Brand: Wireless Matrix Corporation Pages: 20
PI Manufacturing 6900 Series Installation And Operation Manual preview
6900 Series
Brand: PI Manufacturing Pages: 43
Noga net NG-192 User Manual preview
NG-192
Brand: Noga net Pages: 44
Ebyte E104-BT54S User Manual preview
E104-BT54S
Brand: Ebyte Pages: 10
Novatel MiFi 2200 Comcast User Manual preview
MiFi 2200 Comcast
Brand: Novatel Pages: 79
Sugar JW-MRD-6001 Quick Start Manual preview
JW-MRD-6001
Brand: Sugar Pages: 6
Linksys SVR200 - One Wireless-G ADSL/EN Services Router Wireless Datasheet preview
SVR200 - One Wireless-G ADSL/EN Services Router Wireless
Brand: Linksys Pages: 3
3Com 3CRWE80096A - 11 Mbps Wireless LAN Access Point 8000 User Manual preview
3CRWE80096A - 11 Mbps Wireless LAN Access Point 8000
Brand: 3Com Pages: 58

Brands by name

Popular brands

Load more brands