Unified Access Point Administrator’s Guide
Unified Access Point Administrator’s Guide
Page 98
January 2015
Section 8 - Configuring Client Quality of Service (QoS)
Field
Description
IP DSCP
To use IP DSCP as a match criteria, select the check box and select a DSCP value keyword
or enter a DSCP.
Select from List
Select from a list of DSCP types.
Match to Value
Enter a DSCP Value to match (0 – 63).
IPv4 and IPv6 Class Maps
Source Port
Select this field to include a source port in the match condition for the rule. The source port
is identified in the datagram header.
Once you select the field, choose the port name or enter the port number.
Select From List
Select the keyword associated with the source port to match:
•)
ftp
•)
ftpdata
•)
http
•)
smtp
•)
snmp
•)
telnet
•)
tftp
•)
www
Each of these keywords translates into its equivalent port number.
Match to Port
Enter the IANA port number to match to the source port identified in the datagram header.
The port range is 0 – 65535 and includes three different types of ports:
•) 0 – 1023: Well Known Ports
•)
1024 – 49151: Registered Ports
•)
49152 – 65535: Dynamic and/or Private Ports
Destination Port
Select this field to include a destination port in the match condition for the rule. The
destination port is identified in the datagram header.
Once you select the field, choose the port name or enter the port number.
Select From List
Select the keyword associated with the destination port to match:
•)
ftp
•)
ftpdata
•)
http
•)
smtp
•)
snmp
•)
telnet
•)
tftp
•)
www
Each of these keywords translates into its equivalent port number.
Match to Port
Enter the IANA port number to match to the destination port identified in the datagram
header. The port range is 0 – 65535 and includes three different types of ports:
•) 0 – 1023: Well Known Ports
•)
1024 – 49151: Registered Ports
•)
49152 – 65535: Dynamic and/or Private Ports
