Unified Access Point Administrator’s Guide
Unified Access Point Administrator’s Guide
Page 64
January 2015
Section 4 - Managing the Access Point
To create an access list, click the
Management ACL
tab.
Figure 32 -
Configure Management Access Control Parameters
Field
Description
Management ACL
Mode
Enable
or
disable
the management ACL feature. At least one IPv4 address should be
configured before enabling Management ACL Mode. If enabled, only the IP addresses you
specify will have Web, Telnet, SSH, and SNMP access to the management interface.
IP Address (1–5)
Enter up to
five IPv4 addresses
that are allowed management access to the AP. Use
dotted-decimal format (for example, 192.168.10.10).
IPv6 Address (1–5)
Enter up to
five IPv6 addresses
that are allowed management access to the AP. Use the
standard IPv6 address format (for example 2001:0db8:1234::abcd).
Table 35 - Management ACL
Note:
After you configure the settings, click
Apply
to apply the changes and to save the settings.
