D-Link DSR-Series User Manual
331
Appendix D - Log Output Reference
DES Hardware Test Duration: %d:%d,
DEBUG
try_module_get failed
WARNING
SHA Software Test: %d iterations, iter
DEBUG
try_module_get failed \
WARNING
SHA Software Test Duration: %d:%d,
DEBUG
%s: unknown pairwise cipher %d,
WARNING
SHA Hardware Test: %d iterations, iter
DEBUG
%s: unknown group cipher %d,
WARNING
SHA Hardware Test Duration: %d:%d,
DEBUG
%s: unknown SIOCSIWAUTH flag %d,
WARNING
MD5 Software Test: %d iterations, iter
DEBUG
%s: unknown SIOCGIWAUTH flag %d,
WARNING
MD5 Software Test Duration: %d:%d,
DEBUG
%s: unknown algorithm %d,
WARNING
MD5 Hardware Test: %d iterations, iter
DEBUG
%s: key size %d is too large,
WARNING
MD5 Hardware Test Duration: %d:%d,
DEBUG
unable to load %s, scan_
modnames[mode]
WARNING
./pnac/src/pnac/linux/kernel/
xcalibur.c:209:#define DEBUG_PRINTK printk
DEBUG
Failed to mkdir /proc/net/madwifi
WARNING
bcmDeviceInit: registration failed
DEBUG
try_module_get failed
WARNING
bcmDeviceInit: pCdev Add failed
DEBUG
%s: request_irq failed, dev->name
WARNING
REG Size == 8 Bit
DEBUG
too many virtual ap’s (already got %d),
sc->sc_nvaps
WARNING
Value = %x ::: At Page = %x : Addr = %x
DEBUG
%s: request_irq failed, dev->name
WARNING
REG Size == 16 Bit
DEBUG
rix %u (%u) bad ratekbps %u mode
%u,
WARNING
Value = %x ::: At Page = %x : Addr = %x
DEBUG
cix %u (%u) bad ratekbps %u mode
%u,
WARNING
REG Size == 32 Bit
DEBUG
%s: no rates for %s?,
WARNING
Value = %x ::: At Page = %x : Addr = %x
DEBUG
no rates yet! mode %u, sc->sc_
curmode
WARNING
REG Size == 64 Bit
DEBUG
%u.%u.%u.%u sent an invalid ICMP
WARNING
REG Size is not in 8/16/32/64
DEBUG
dst cache overflow
WARNING
Written Value = %x ::: At Page = %x : Addr = %x
DEBUG
Neighbour table overflow.
WARNING
bcm_ioctl :Unknown Ioctl Case :
DEBUG
host %u.%u.%u.%u/if%d ignores
WARNING
=========Register Dump for Port Number #
%d=========,port
DEBUG
martian destination %u.%u.%u.%u
from
WARNING
%s : Read Status=%s data=%#x,regName[j],
DEBUG
martian source %u.%u.%u.%u from
WARNING
%s : Read Status=%s data=%#x,regName[j],
DEBUG
ll header:
WARNING
powerDeviceInit: device registration failed
DEBUG
%u.%u.%u.%u sent an invalid ICMP
WARNING
powerDeviceInit: adding device failed
DEBUG
dst cache overflow
WARNING
%s: Error: Big jump in pn number. TID=%d, from
%x %x to %x %x.
DEBUG
Neighbour table overflow.
WARNING
%s: The MIC is corrupted. Drop this frame.,
__func__
DEBUG
host %u.%u.%u.%u/if%d ignores
WARNING
%s: The MIC is OK. Still use this frame and update
PN., __func__
DEBUG
martian destination %u.%u.%u.%u
from
WARNING
ADDBA send failed: recipient is not a 11n node
DEBUG
martian source %u.%u.%u.%u from
WARNING
Cannot Set Rate: %x, value
DEBUG
ll header:
WARNING
Getting Rate Series: %x,vap->iv_fixed_rate.series
DEBUG
%u.%u.%u.%u sent an invalid ICMP
WARNING
Getting Retry Series: %x,vap->iv_fixed_rate.
retries
DEBUG
dst cache overflow
WARNING
IC Name: %s,ic->ic_dev->name
DEBUG
Neighbour table overflow.
WARNING
