D-Link DSR-Series User Manual
8
Section 3 - Basic Configuration
#4 Set Time and Date
1. Log in to the router.
2. Click
Wizard
in the upper-right side of the page. If you want to manually configure your date/time
settings, refer to “Date and Time” on page 209.
3. Click
Run
in the
Date and Time Wizard
box.
4. Click the continent from the map and then next to
City
, select your time zone from the drop-down
menu. Toggle Daylight Saving to
ON
if it applies to you and then click
Next
.
5. Toggle NTP server to ON to use a time server or toggle to OFF to manually enter the time and date.
6. If you selected ON, select either
Default
or
Custom
from the drop-down menu. If you selected Custom,
enter a primary and secondary NTP server address.
7. Enter the time to synchronize with the NTP server and click
Save
.
8. A summary page will appear. Verify your settings and then click
Finish
.
