D-Link DSR-Series User Manual
125
Section 7 - VPN
L2TP Client
Field
Description
Client
Toggle to
ON
to enable L2TP client.
Server IP
Enter the IP address of the L2TP server you want to connect to.
Remote Network
Enter the remote network address. This address is local for the L2TP Server.
Remote Netmask
Enter the remote network subnet mask.
Username
Enter your L2TP user name.
Password
Enter your L2TP password.
Reconnect Mode
Select
Always On
or
On Demand
.
MPPE Encryption
Toggle to
ON
to enable Microsoft Point-to-Point Encryption (MPPE).
Auto Connect
Toggle to On to enable Auto Connect.
Time
Enter the reconnect time. If the client is disconnected from the server, it will try to connect to the server
after the specified time.
Save
Click
Save
to save and activate your settings.
L2TP VPN Client can be configured on this router. Using this client we can access remote network which is local to
L2TP server. Once client is enabled, the user can access Status > Active VPNs page and establish L2TP VPN tunnel
clicking Connect.
To configure the router as a L2TP VPN client:
1. Click
VPN
>
L2TP VPN
>
L2TP Client
tab.
2. Toggle
Client
to
ON
and complete the fields in the table below.
Note:
When the L2TP Client configuration is correctly saved and the L2TP server is up, the tunnel initiation starts
automatically.
