manualshive.com logo in svg

D-Link DSL-2640T, User Manual

Share
Download
D-Link DSL-2640T User Manual Download Page 97

DSL-2640T ADSL 2+ Router User Guide

 

 

94

Miscellaneous Configuration 

To perform a statndard Ping test for network connectivity, click the 

Misc.

 window button in the 

Tools

 directory to view 

the 

Miscellaneous Configuration

 window. 

 

Miscellaneous Configuration window 

Other functions available in Miscellaneous Configuration menu are a Ping test and IGMP enable/disable. 

Ping Test 

The Ping test functions on the WAN and LAN interfaces. Type the IP address you want to check in the space provided 
and click the 

Ping 

button. Read the Ping test result in the space immediately below. 

IGMP Proxy 

The 

Miscellaneous Configuration

 window also allows you to enable IGMP forwarding. 

This is disabled by default. This setting will not allow IGMP (Internet Group Management Protocol) packets to be 
forwarded to the LAN. IGMP is used to manage multicasting on TCP/IP networks—most users will not need to enable 
this. Some ISPs use IGMP to perform remote configuration for client devices, such as the Router. If you are unsure, 
please check with your ISP. To enable IGMP service to the LAN interface, select 

Enabled

 and click the 

Apply

 button. 

Summary of Contents for DSL-2640T





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands