manualshive.com logo in svg

D-Link DSL-2640T, User Manual

Share
Download
D-Link DSL-2640T User Manual Download Page 83

DSL-2640T ADSL 2+ Router User Guide

 

 

80

Wireless Management 

The Wireless Management menu includes separate menus for 

Access List

, 

Associated Stations

 display, 

Multiple SSID

 

operation and 

WDS 

(Wireless Distribution System). Click the appropriate radio button to view the menu for any of 

these Wireless Management menus. 

 

Wireless Management - Access List menu 

Access List 

All computers are uniquely identified by their MAC (Media Access Control) address. The 

Access List

 menu is used to 

allow or deny computers access to the Router’s Wireless interface based on their MAC address.  

To enable the Access List, click to select the 

Enable Access List

 box and add MAC addresses to the list that will be 

allowed or denied access.  

To add a MAC address to the list, enter the 

MAC Address

 in the entry field provided using the format 

00-00-00-00-00-00

, select the radio button option to 

Allow

 or 

Deny

 access to the MAC address and click the 

Add 

button. The MAC address will appear listed below. To remove a MAC Address from the list, click the 

Delete

 radio 

button next to the MAC address.  

All changes must be saved and the Router restarted for the Access List to be in effect. 

The 

Associated Stations

 list can also be used to block access of any MAC address currently associated with the Acess 

Point (see next section). 

 

Summary of Contents for DSL-2640T





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands