D-Link DSL-2640T User Manual Download Page 12

Page: 12 / 116

DSL-2640T ADSL 2+ Router User Guide

Front Panel Display

Place the Router in a location that permits an easy view of the LED indicators on the front panel.

The LED indicators on the front panel include

Power

Status

ADSL

and

Ethernet

. The

ADSL

, and

Ethernet

indicators monitor link status and activity (

Link/Act

Power

Steady green light indicates the unit is powered on. When the device is

powered off this remains dark.

Status

Lights steady green during power on self-test (POST). Once the connection

status has been settled, the light will blink green. If the indicator lights

steady green after the POST, the system has failed and the device should be

rebooted.

ADSL (Link/Act)

Steady green light indicates a valid ADSL connection. This will light after the

ADSL negotiation process has been settled. A blinking green light indicates

activity on the WAN (ADSL) interface.

WLAN (Link/Act)

Steady green light indicates a wireless connection. A blinking green light

indicates activity on the WLAN interface.

LAN 1-4 (Link/Act)

A solid green light indicates a valid link on startup. This light will blink when

there is activity currently on any Ethernet port.

Summary of Contents for DSL-2640T





















































































































Search results

Summary of Contents for DSL-2640T

Reviews:

Brands by name

Popular brands

D-Link DSL-2640T, User Manual

Search results

Summary of Contents for DSL-2640T

Reviews:

Brands by name

Popular brands