D-Link DSL-2540T User Manual Download Page 93

Page: 93 / 112

DSL-2540T ADSL Router User Guide

Firmware

Note

Performing a Firmware Upgrade can sometimes change the configuration settings. Be
sure to back-up the Router’s configuration settings before upgrading the firmware.

Use the

Firmware Upgrade

window to load the latest firmware for the device. Note that the device configuration

settings may return to the factory default settings, so make sure you save the configuration settings with the

System

Settings

window described above.

Firmware Upgrade window

To upgrade firmware, type in the name and path of the file or click on the

Browse

button to search for the file. Click the

Apply

button to begin copying the file. The file will load and restart the Router automatically.

Summary of Contents for DSL-2540T

















































































































Search results

Summary of Contents for DSL-2540T

Reviews:

Related manuals for DSL-2540T

Brands by name

Popular brands

D-Link DSL-2540T, User Manual

Search results

Summary of Contents for DSL-2540T

Reviews:

Related manuals for DSL-2540T

Brands by name

Popular brands