DSL-2540T ADSL Router User Guide
83
Remote Log
Us the
Remote Log Settings
window to set up logging to servers or computers that are located outside the LAN or
subnet of the Router.
Remote Log Settings window
Select the
Log Level
from the pull-down menu. The levels available are:
Alert, Critical, Debug, Error, Info, Notice,
Panic
and
Warning.
Type in the IP address of a receiver for the log message in the
Add an IP Address
field and click
on the
Add
button. Log message receivers that are added appear listed in the
Select a logging destination
pull-down
menu. These may be used at any time for other types of log messages. To remove a log message receiver from the list,
select it and click on the
Remove
button. Click the
Apply
button when you have configured the log message receivers.
Remember to save the settings to non-volatile memory.
Summary of Contents for DSL-2540T
