D-Link DSL-2540T User Manual Download Page 60

Page: 60 / 112

DSL-2540T ADSL Router User Guide

Virtual Server window

There are many different pre-configured rules available for specific functions such as Internet gaming, VPN, streaming
and interactive multi-media, standard TCP/IP protocols, reserved ports, p2p, network management applications, and so
on.

You may also create customized rules to manage TCP/UDP ports. The pre-configured rules include those listed in the
table here:

Category

Available Rules

Games:

Alien vs. Predator, Asheron’s Call, Dark Rein 2, Delta Force, Doom, Dune
2000, DirectX (7.8) Games, EliteForce, EverQuest, Fighter Ace II, Half Life,

Heretic II, Hexen II, Kali, Motorhead, MSN Gaming Zone, Myth: The Fallen

Lords, Need for Speed Porsche, Need for Speed 3, Outlaws, Rainbow 6,

Rogue Spear, Starcraft, Tiberian Sun, Ultima, Unreal Tournament, Quake 3

Server, Quake 2 Server, and Unreal Server.

VPN

IPSec (L2TP) and PPTP

Audio/Video

Net2Phone, Netmeeting, and QuickTime 4 Server

Applications

VNC, Win2k Terminal, PC Anywhere, Netbios, RemoteAnything, Radmin,

LapLink, CarbonCopy, and Gnutella.

Summary of Contents for DSL-2540T

















































































































Search results

Summary of Contents for DSL-2540T

Reviews:

Related manuals for DSL-2540T

Brands by name

Popular brands

D-Link DSL-2540T, User Manual

Search results

Summary of Contents for DSL-2540T

Reviews:

Related manuals for DSL-2540T

Brands by name

Popular brands