D-Link DSL-2540T User Manual Download Page 6

Page: 6 / 112

DSL-2540T ADSL Router User Guide

Information you will need from your ADSL service provider:

Username

This is the Username used to log on to your ADSL service
provider’s network. It is commonly in the form

−

[email protected] Your ADSL service provider uses this to

identify your account.

Record info here

Password

This is the Password used, in conjunction with the Username

above, to log on to your ADSL service provider’s network.

This is used to verify the identity of your account.

WAN Setting /

Connection Type

These settings describe the method your ADSL service

provider uses to transport data between the Internet and

your computer. Most users will use the default settings. You

may need to specify one of the following WAN Setting and

Connection Type configurations (Connection Type settings

listed in parenthesis):

PPPoE/PPoA (PPPoE LLC, PPPoA LLC or PPPoA VC-Mux)

Bridge Mode (1483 Bridged IP LLC or

1483 Bridged IP VC-Mux)

Static IP Address (Bridged IP LLC, 1483 Bridged IP VC-Mux,

1483 Routed IP LLC, 1483 Routed IP VC-Mux or IPoA)

Dynamic IP Address (1483 Bridged IP LLC or 1483 Bridged IP
VC-Mux)

Default = PPPoE/PPPoA (PPPoE LLC)

VPI

Most users will not be required to change this setting. The
Virtual Path Identifier (VPI) is used in conjunction with the

Virtual Channel Identifier (VCI) to identify the data path

between your ADSL service provider’s network and your

computer. If you are setting up the Router for multiple virtual

connections, you will need to configure the VPI and VCI as

instructed by your ADSL service provider for the additional
connections. This setting can be changed in the WAN

Settings window of the web management interface. Default

value = 8

VCI

Most users will not be required to change this setting. The

Virtual Channel Identifier (VCI) used in conjunction with the

VPI to identify the data path between your ADSL service

provider’s network and your computer. If you are setting up

the Router for multiple virtual connections, you will need to

configure the VPI and VCI as instructed by your ADSL service
provider for the additional connections. This setting can be

changed in the WAN Settings window of the web

management interface. Default value = 35

Note

The Setup Wizard can be used to configure the Internet connection for most users.

Summary of Contents for DSL-2540T

















































































































Search results

Summary of Contents for DSL-2540T

Reviews:

Related manuals for DSL-2540T

Brands by name

Popular brands

D-Link DSL-2540T, User Manual

Search results

Summary of Contents for DSL-2540T

Reviews:

Related manuals for DSL-2540T

Brands by name

Popular brands