background image

 

Main Window 

If you do not have a backup schedule for your PC, start your backup from 
the ShareCenterNAVI Main Window. 

1.  Go to the Main Window. 

2. Click 

the 

SmartSYNC

 icon. 

3. Click 

the 

Backup

 button. 

4.  Under Backup your data to, choose: 

  The NAS or Local drive (your PC or MAC) from the first dropdown 

menu. 

  The letter designation of your PC or MAC drive under the second 

dropdown menu. 

5.  Do any of the following actions to select your backup folders: 

  Check the Backup My Data box – Selects the My Documents, 

Favorites, and Desktop folders with all their contents. 

  Click the Add to Backup 

  icon – Opens the My Documents 

folder. Click a folder you want to back up, then click the Choose 

button. Repeat for additional folders. 

  Drag and drop the folders you want to back up to the Backup your 

data from window. 

6. Click 

the 

Backup

 button. 

The backup begins immediately. 

Device List 

Before you can do a back-up from the ShareCenterNAVI Main Window, 
you must create a backup schedule. 

 

91

 

Summary of Contents for DNS-1250-04





























































































































Reviews: