D-Link DNS-1250-04 User Manual Download

Page: 114 / 124

106

8. If you chose Manual, choose the type of RAID Volume you want.



Maximum Capacity and performance - RAID 0, using all physical

drives



Data Protection - RAID 5, using all physical drives

Click the

Next

button to continue.

9. Choose a network drive letter from the dropdown menu.

The drive is mapped as a network drive on your PC.
The list begins with Z and goes in reverse alphabetical order.
Click the

Next

button to continue.

10. Review your parameters.



To make changes, click the Previous button.



To accept the parameters and configure your NAS system, click

the OK button.

11. Click the

Yes

button in the confirmation box.

The NAS reboots. Your RAID volume is ready.

Summary of Contents for DNS-1250-04




























































































































Search results

Summary of Contents for DNS-1250-04

Reviews:

Related manuals for DNS-1250-04

Brands by name

Popular brands

D-Link DNS-1250-04, User Manual

Search results

Summary of Contents for DNS-1250-04

Reviews:

Related manuals for DNS-1250-04

Brands by name

Popular brands