D-Link DNS-1250-04 User Manual Download

Page: 49 / 124



Synchronized – A new logical drive shows “No” until synchronizing

is completed



Parity Pace – Pertains to some RAID levels



WWN – World Wide Number, a unique identifier assigned to this

logical drive



Codec Scheme – Pertains to some RAID levels



Serial Number – Assigned to this logical drive



ALUA Access State For Ctrl1



ALUA Access State For Ctrl2



LDType – Displays the LD type of the logical drive.

Logical Drive Settings

To make logical drive settings:

1. Click

the

Storage

tab.

2. Click

the

Logical Drive

button.

3. Mouse-over the logical drive you want and click the

Settings

button.

4. Make setting changes are required.



Change or delete the alias in the Alias field.



Read Policy – ReadCache, ReadAhead, or NoCache



Write Policy – WriteThru or WriteBack

5. Click

the

Save

button.

Logical Drive Check Tables

To view logical drive check tables:

1. Click

the

Storage

tab.

Summary of Contents for DNS-1250-04




























































































































Search results

Summary of Contents for DNS-1250-04

Reviews:

Related manuals for DNS-1250-04

Brands by name

Popular brands

D-Link DNS-1250-04, User Manual

Search results

Summary of Contents for DNS-1250-04

Reviews:

Related manuals for DNS-1250-04

Brands by name

Popular brands