manualshive.com logo in svg

D-Link DNS-1250-04, User Manual

Share
Download
D-Link DNS-1250-04 User Manual Download Page 9

 

Chapter 1: Introduction 

1.1 About 

This 

Manual 

This User Manual describes how to setup, use, and maintain the 
DNS-1250-04 and DNS-1250-06 NAS systems. It also describes how to 
use: 

 ShareCenterNAVI software that you install and run on your PC 

 ShareCenter Pro configuration manager software that runs on the NAS 

systems by browser. 

This manual includes a full table of contents, chapter task lists, and 
numerous cross-references to help you find the specific information you 
are looking for. 

Also included are four levels of notices: 

Note 

 

A Note provides helpful information such as hints or 
alternative ways of doing a task.

 

 

Important 

 

An Important calls attention to an essential step or point 
required to complete a task. Important items include 
things often missed.

 

 

Caution 

 

A Caution informs you of possible equipment damage or 
loss of data and how to avoid them. 

 

Warning 

 

A Warning notifies you of probable equipment damage 
or loss of data, or the possibility of physical injury, and 
how to avoid them.

 

 

1

 

Summary of Contents for DNS-1250-04





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands