D-Link DNS-1250-04 Page 113 User Manual Download

Page: 113 / 124

105

Advanced Setup

To configure your NAS system using Advanced Setup:

1. Go to the Main Window.

2. Click

the

Setup Wizard

icon.

3. Click

the

Advanced Setup

button.

4. Choose

Automatic

(DHCP) or

Manual

network settings.

5. If you chose

Manual

settings, type entries for each of the following

parameters in the fields provided.



Computer (NAS system) Name



IP Address



Subnet Mask



Gateway



Primary and Secondary DNS – optional

Click the

Next

button to continue.

6. Choose the following values from their respective dropdown menus.



Timezone



Year



Month



Day



Time in Hours, Minutes, and Seconds

Click the

Next

button to continue.

7. Choose Automatic or Manual RAID Volume creation.

Summary of Contents for DNS-1250-04




























































































































Search results

Summary of Contents for DNS-1250-04

Reviews:

Related manuals for DNS-1250-04

Brands by name

Popular brands

D-Link DNS-1250-04, User Manual

Search results

Summary of Contents for DNS-1250-04

Reviews:

Related manuals for DNS-1250-04

Brands by name

Popular brands