DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide
46
11.
Ethernet Ring Protection Switching (ERPS)
Commands
11-1
description
This command is used to configure the description for Ethernet Ring Protection (ERP) instances.
description
DESCRIPTION
Parameters
None.
Default
None.
Command Mode
ERP Instance Configuration Mode.
Command Default Level
Level: 15.
Usage Guideline
This command is used to configure the description for the ERP instances.
Example
This example shows how to configure the description for the ERP instances.
Switch# configure terminal
Switch(config)# ethernet ring g8032 major-ring
Switch(config-erp)#instance 1
Switch(config-erp-instance)#description custom-description
Switch(config-erp-instance)#
11-2
ethernet ring g8032
This command is used to create or modify an ITU-T G.8032 ERP physical ring and enter the ERP configuration
mode. Use the
no
form of this command to delete the specified ring.
ethernet ring g8032
RING-NAME
no ethernet ring g8032
RING -NAME
Parameters
RING-NAME
Specifies the name of the ERP ring with the maximum of 32
characters.
Default