DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide
206
37.
System File Management Commands
37-1
boot image
This command is used to specify image that will be used as the image file for the next boot.
boot image {image1 | image2}
Parameters
Image1
Specifies the image1 for the next boot.
Image2
Specifies the image2 for the next boot.
Default
By default, there is an image file as the boot image.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 15.
Usage Guideline
When using the boot image command, the associated specified boot image file will be the startup boot image
file for the next reboot. Use show boot command to display information of boot images.
Example
This example shows how to specify that the Switch should use the image2 as the boot image file for the next
startup.
Switch# configure terminal
Switch(config)# boot image image2
37-2
copy
This command is used to copy a file to another file.
copy
SOURCE-URL DESTINATION-URL
Parameters
SOURCE-URL
Specifies the source URL for the source file to be copied. One
special form of the URL is represented by the following keywords.
If
startup-config
is specified as the
SOURCE-URL
, the purpose is
to upload the startup configuration, save the startup configuration
as the file in the file system, or to execute the startup configuration
as the running configuration.
If
running-config
is specified as the
SOURCE-URL
, the purpose