DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide
1
1.
Introduction
This manual’s command descriptions are based on the software release 1.10 The commands listed here
are the subset of commands that are supported by the DIS-200G Series Smart Switch.
Audience
This CLI Reference Guide is intended for network administrators and other IT networking professionals
responsible for managing the switch by using the Command Line Interface (CLI). The CLI is the primary
management interface to the DIS-200G Series Smart Switch, which will be generally be referred to simply
as “the Switch” within this manual. This manual is written in a way that assumes that you already have the
experience and knowledge of Ethernet and modern networking principles for Local Area Networks.
Other Documentation
The documents below are a further source of information in regards to configuring and troubleshooting the
Switch. All the documents are available from the CD bundled with this switch, or from the D-Link website.
Other documents related to the Switch are:
DIS-200G Series Industrial Gigabit Ethernet Smart Switch
Hardware Installation Guide
DIS-200G Series Industrial Gigabit Ethernet Smart Switch
Web UI Reference Guide
Conventions
Convention
Description
Boldface Font
Commands, command options and keywords are printed in
boldface.
Keywords, in the command line, are to be entered exactly as they are
displayed.
UPPERCASE ITALICS Font
Parameters or values that must be specified are printed in
UPPERCASE ITALICS. Parameters in the command line are to be
replaced with the actual values that are desired to be used with the
command.
Square Brackets [ ]
Square brackets enclose an optional value or set of optional
arguments.
Braces { }
Braces enclose alternative keywords separated by vertical bars.
Generally, one of the keywords in the separated list can be chosen.
Vertical Bar |
Optional values or arguments are enclosed in square brackets and
separated by vertical bars. Generally, one or more of the vales or
arguments in the separated list can be chosen.
Blue Courier Font
This convention is used to represent an example of a screen console
display including example entries of CLI command input
with the corresponding output. All examples used in this manual are
based on the DIS-200G switch.
Notes, Notices, and Cautions
Below are examples of the three types of indicators used in this manual. When administering your switch
using the information in this document, you should pay special attention to these indicators. Each example
below provides an explanatory remark regarding each type of indicator.
NOTE:
A note indicates important information that helps you make better use of your device.
