D-Link DIR-400 User Manual Download

Page: 105 / 111

105

D-Link DIR-400 User Manual

Appendix C - Technical Specifications

Advanced Firewall Features

• NAT with VPN Pass-through (Network Address Translation)

• MAC Filtering

• IP Filtering

• URL Filtering

• Domain Blocking

• Scheduling

Operating Temperature

3°F to 131°F ( 0°C to 55°C)

Humidity

95% maximum (non-condensing)

Safety and Emissions

FCC

LEDs

• Power

• Status

• WAN

• WLAN (Wireless Connection)

• LAN (10/100)

Dimensions

• L = 5.6 (14mm)

• W = 4.3 (109mm)

• H = 1. inches (31mm)

* 108Mbps Turbo mode operates only with other D-Link 108 G products. Maximum wireless signal rate derived from IEEE Standard 802.11g specifications.

108Mbps Turbo mode operates only with other D-Link 108 G products. Maximum wireless signal rate derived from IEEE Standard 802.11g specifications.

Maximum wireless signal rate derived from IEEE Standard 802.11g specifications.

Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction,

and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range.

Weight

7.8 oz (0.kg)

Warranty

1 Year

Summary of Contents for DIR-400
















































































































Search results

Summary of Contents for DIR-400

Reviews:

Related manuals for DIR-400

Brands by name

Popular brands

D-Link DIR-400, User Manual

Search results

Summary of Contents for DIR-400

Reviews:

Related manuals for DIR-400

Brands by name

Popular brands